PX1152M
15” Two-Way Dual
Manifolded HF
90° x 45° Full Range
Loudspeaker System
Key Features:
•
Dual ND2 2”Voice Coil, 1”Exit Neodymium
Compression Drivers
•
DVX3151 15” LFTransducer with Forced Air
Cooling
•
•
Very High Sensitivity, 134 dB Maximum SPL
Ultra-Compact, Low Profile, Multipurpose
Design
•
•
90° x 45° Coverage Pattern
600W Continuous (2400W Peak) Power
Handling
•
•
•
Passive/BiampSelectable
Integral Rigging Point for VSA-1 Strong Arm
Pole Mount forTripod Use
General Description:
Technical Specifications:
The Electro-Voice® PX1152M is a versatile fullrange, 2-
way floor monitor loudspeaker system that is part of the
Electro-Voice® Phoenix Series and is intended for high
output sound reinforcement in a large range of portable
sound applications. The PX1152M is capable of being
configured as either passive or biamp, and can be used
fullrange for stage monitor applications or used with a
subwoofer as a very compact system with extended low
frequency capability.
Freq. Response1 (-3 dB): 70 Hz - 15 kHz
Freq. Range1 (-10 dB): 50 Hz - 19 kHz
Rec. Hipass Frequency: 45 Hz
Axial Sensitivity1: 100 dB (1W/1m)
Max Calculated SPL1: 134 dB
Horizontal Coverage: 90°
Vertical Coverage: 45°
Power Handling (Passive): 600W Continuous, 2400W Peak
LF Power Handling (Biamp): 500W Continuous, 2000W Peak
HF Power Handling (Biamp): 80W Continuous, 320W Peak
LF Transducer: (1) DVX3151, 15 in. (381mm) Driver
The PX1152M uses the DVX3151 woofer, a high
efficiency 15-inch woofer with forced air cooling. Dual
ND2-16 compression drivers are precisely summed in a
manifold for increased power handling, maximum SPL,
and low distortion. The very low distortion 90° x 45° horn
provides optimal coverage in the PX1152M’s
configurations. The enclosure is constructed of 18-mm,
13-ply plywood, using tongue and groove joints and
EVCoatTM for long term durability.
HF Transducers: (2) ND2-16, 2 in. (50mm) Diaphragm
Compression Drivers
Crossover Frequency: 1400 Hz
Impedance (Passive): 8 Ohms Nominal
LF Impedance (Biamp): 8 Ohms Nominal
HF Impedance (Biamp): 8 Ohms Nominal
Connectors: (3) Neutrik Speakon NL4's
Enclosure Material: 18mm Plywood with Black EVCoatTM
As a stage monitor, the PX1152M provides symetrical left
and right 60° monitor angles, and NL4 connectors on
each side of the enclosure for connecting multiple
monitors. An integrated rigging point allows for
installation on a truss using the VSA-1 strong arm
accessory.
Suspension: Rigging Point for VSA-1 Strong Arm
Accessory
Grille: Polyester Powder Coated, 16GA
Galvanized Steel, with Rotatable Logo
Dim (H x W x D): 610mm x 442mm x 329mm
(24.00" x 17.42" x 12.97")
Net Weight: 25.1 kg (55.3 lbs)
Shipping Weight: 28.2 kg (62.1 lbs)
1 Half Space measurement.
|
Craftsman Brush Cutter 358798260 32cc User Manual
Craftsman Tiller 91729604 User Manual
Cuisinart Toaster TOB 50BC User Manual
Dukane Welder 403570 01 User Manual
Dyna Lite Landscape Lighting T4222 PS User Manual
Everpure Water System CGT 10S User Manual
Extron electronic Stereo Amplifier MDA 3AV RCA User Manual
Fellowes Paper Shredder P 58Cs User Manual
Fender Musical Toy Instrument 2016 Limited User Manual
GE Network Card EPM5200P User Manual